Nordson Banner
Kansai Nerolac Banner  


 Powder Coating Equipment
 Spray Booths
 Turnkey Systems
 Raw Material
 Air Compressors
 Dust Collection, Filters
 Pre treatment Chemical 
 Masking Products
 Powder Coating Units
 Powder Manufacturers
 Testing Equipment
 Testing Labs
 Used/Surplus equipment
 Books Periodicals



E-Learning at the Coatings Training Institute
26 Nov 13-1 Jan 17
Internationally Recognised Certificate in Coatings Technology
E-Learning at the Coatings Training Institute
The Coatings Training Institute is the ideal place for you to improve your technical knowledge or technical English and make a step change in your career.
To subscribe to our free monthly "IPC- e-newsletter", and read the current edition click the banner below.


To subscribe to our paid "ebiz" newsletter click the banner below.


Explore our Archives

Explore all the newsletters issued in the past ten years.
Share your messages, problems, tips, queries, discussions etc. on our message board..
Note : Do not post messages of commercial nature.

You can promote your products and services through our website. Click here for various promotion options

Many portals talk to the world...
IPC  talks to people !

For those who need to know the moderator personally.
Vivek Soley

Create Your Badge

India Powder Coating

Promote Your Page Too






“There has been an awakening ... have you felt it ?

Star Wars is an American epic space opera franchise centered on a film series created by George Lucas. Star Wars: The Force Awakens is an upcoming American epic space opera film directed, co-produced, and co-written by J. J. Abrams. The seventh installment in the main Star Wars film series, it stars Harrison Ford, Mark Hamill, Carrie Fisher, Adam Driver, Daisy Ridley, John Boyega, Oscar Isaac, Lupita Nyong'o, Andy Serkis, Domhnall Gleeson, Anthony Daniels, Peter Mayhew, and Max von Sydow. The story is set approximately 30 years after the events of Return of the Jedi. <More>


Welcome to the December 2015 edition of the IPC e-newsletter. The IPC e newsletter is distributed free to more than 5000 people around the world.

This edition of the newsletter contains:

Green News
News Features
Books and Periodicals
People Visit Feedback
Exhibition and Conferences.

If you have information you would like to have included in this newsletter, please contact the moderator using the details given at the end of each newsletter. While we have used our best efforts in collecting and preparing the information on this newsletter, we do not assume, any liability for any loss or damage caused by errors or omissions, whether such errors or omissions resulted from negligence, accident or other causes. The user may use their own discretion while using the information.

If your e-mail program does not support HTML or if this e-newsletter does not appear correctly, please copy and paste the following URL in your web browser:


A lot of efforts go into the compilation of the pages of our website  Some of the contributions from our subscribers are exclusive.
While using the contents into other print media, we would appreciate a reference to our website.


Some of our subscribers are not receiving the newsletter on their email ids. Here are some tips.

Check your spam or junk mail box.
If your are not subscribed to our newsletter please add your email id in the box given below.

Subscribe to our e newsletter

Powered by


t appears that many of our subscribers are not aware of our e-biz newsletter. Our website generates a number of business enquiries every week. Such sales leads can generate business for a several products. You must have observed that we are eager to share such information with all the relevant people. Unlike, other business website which restrict "supplier to customer" interaction, we promote this activity.

Subscribe to the e-biz-newsletter, which contains information about potential customers who are in need of products related to powder coating.

To get this e-biz-newsletter, the user would have to pay a small annual processing fee. Please send a DD or cheque AT PAR of Rs 7500 (US$ 200) in favour of "India Powder Coating" payable at Indore at the
contact address




Green News
More Shocking Testimony in DuPont Cancer Trial – DuPont Witness Admits Discharged Chemical VERY Toxic
Dr. Anthony J. Playtis, a retired occupational hygienist employed at DuPont's Washington Works facility, was the only witness called by the company's defense attorneys yesterday in the case of Carla Bartlett v. DuPont. Although he was expected to support the company and its actions leading to the contamination of drinking water in Ohio and West Virginia, Dr. Playtis had to admit under cross-examination that DuPont's Teflon chemical C8, which DuPont released in mass into the environment, is VERY toxic <more>



  Infomercial Vijay Enterprises Pvt Ltd  
Vijay Enterprises Pvt. Ltd. 

Vijay Enterprises is a leading manufacture of powder coating materials (PCM) in India. VIJAY COAT today stands as a Reliable source of High Quality and Durable Powder Coating materials at very reasonable prices. Vijay's PCM find extensive application for industrial and other demanding applications. Vijay enterprises was incorporated in 1995 with a view to supplying quality PCMs to Indian industry. Vijay's manufacturing set up is equipped with best machines from M/s Buss AG Switzerland who are world's largest manufacturer of Powder Coating Machines. Vijay has now established itself and earned a name for its quality supplies and prompt delivery at reasonable prices.

The types of powders manufactured by VIJAYCOAT are as under.
Pure Epoxy
Epoxy Polyester (Hybrid)
Pure Polyester (TGIC)
Pure Polyester (TGIC Free)
Super Durable
Poly Urethane Powder

Types of Finishes manufactured by VIJAYCOAT
Semi Glossy
Specialties like Silver, Gold, Copper
Antique Finish
Hammer Tone
Wood Finish
Pearl Finish
Coloured Transparent

Technical Powders Manufactured by VIJAYCOAT
Fast Cure
Lower Temperature Cure
Thin Film Powders
Hot water resistance powders
Heat Resistant Powders for automobile silencers
Fire Retardant Powders
Powders for in contact with food stuff (Food Grade)
Electrical Insulation Grade
Lead Free and ROHS Compliant Powders
Reach registered European Powders.

Fusion Bonded Epoxy Powders
Fusion bonded Epoxy Powders for Reinforcing Bars
Fusion bonded Epoxy Powders for Pipe Coatings

Administrative Office:
Vijay Enterprises Pvt. Ltd.

Admin. Office :
65, World Business House
Nr Piramal Garden Cross Road
Eliss Bridge, AHMEDABAD
Ph 079-26461540, 65242828, Tel/Fax 079-26461539 
Email:  ,  


  Infomercial Jotun  
  Jotun Powder Coatings Unveils New Innovations in Sustainable Technology
Ultra Shine & The Aurora Collection Launched Globally

Jotun, the world's leading paint and coatings supplier, has strengthened its diverse powder coatings range with the introduction of Ultra Shine and The Aurora collection. Boasting new technological advances, these new innovations provide sustainable and environmentally-friendly solutions in powder coating technology.

Inspired by the enchanting Northern Lights, The Aurora Collection builds on the brand's promise for innovative, eco-friendly products. Useable on both aluminum and steel, the coatings provide an impeccable metallic effect and noticeable consistency in application, hiding any substrate imperfections, whilst also minimising a negative effect on the environment. Using 40 times less water, 10 times less electricity and 20 times less gas, the production process saves time and natural resources whilst keeping a high-performance and consistent finish.

The Aurora Collection is available in 11 captivating and stylish colours and sets a new benchmark for high-quality and durable products.

Ultra Shine is a sustainable powder alternative to the chrome plating process and has a minimal negative effect on the environment. Ultra Shine provides a safe alternative to these problems, with the production process using less energy and water, as well as reducing health risks to the workforce.

Retaining the coveted bright 'mirror' appearance, Ultra Shine enjoys all the benefits of powder technology, in addition to the capability of increasing production capacity by over 10 times, resulting in a 70 per cent decrease in cost. Designed for  aluminum and steel, it meets the rigorous demands of the furniture industry.

Olaf Conreur, Global Marketing Director at Jotun Powder Coatings comments: 'At Jotun Powder Coatings, we have been providing consultants and engineers with high quality, cost effective, sustainable and protective powder coating solutions for many years. Our products are known for withstanding extreme levels of UV light, various levels of humidity, corrosion and other environmental pollutants to preserve their strength and appearance.' 'Sustainability is so important when developing our products, especially in a region which is susceptible to such harsh climates. Our products are designed to meet the latest industry standards and always developed with the environment in mind. The Aurora Collection and Ultra Shine were the results of a long journey of research and development and it is important we provide our customers with the latest technology and trends in powder coatings.'

 It is pioneering concepts such as this that underlines Jotun's ability to meet global requirements of ambitious projects, like Masdar City, Burj Khalifa, Eiffel Tower, China Opera House, and Nile City Complex.

About Jotun
Jotun was founded in Norway, 1926 and is now one of the world's leading paint and coating manufacturers. Establishing its presence in the Middle East in 1974, with Jotun UAE Ltd, it has expanded dramatically throughout the region and is the first paint manufacturer to be awarded the ISO 9001: 2008, ISO 14001 & OHSAS 18001  certification. The company also has state of the art manufacturing facilities in Abu Dhabi, Dubai, Saudi Arabia, Oman and Egypt. Jotun Powder Coatings is a leading supplier to companies active in industries related to appliances, furniture, building components, pipelines, infrastructure and general industries. Powder Coatings have been designed to meet the latest industry standards and are developed with sustainability in mind, using the latest technologies. With three decades of experience in the Middle East, Jotun is at the forefront of offering customers products specifically suited to local conditions.

For further information, please contact:
Divya Murali
Marketing and Industrial Segment Manager
Jotun Powder Coatings
Jotun India Private Limited,
502, 5th Floor, Boston House,
Suren Road, Andheri East,
Mumbai - 400093
Mobile No: + 91 9920375258
Office : +91 22 67872157



  Infomercial Sun Coats  
Since 2005, we, Sun Coaters, have been offering premium quality Coating Powder and
Powder Coatings Paints to the customers. We are a manufacturer, trader, exporter and supplier of Glossy Coating Color Powder, Polyester Coating Color Powder, Polyester Hybrid Color Powder and Industrial Polyester Color Powder. We also provide Epoxy Powder Coatings, Pure Polyester Powder Coatings, Epoxy Polyester Powder Coatings, Glossy Finish Powder Coatings, Matt Finish Powder Coatings and much more.

We make all our paints and powder using good quality ingredients. All the products are made under the supervision of quality experts. And so, our products carry numerous matchless features like long storage life and cost-effectiveness. Customers admire them for their high mechanical performance, excellent chemical resistance, good electric insulation ability, high stability, corrosion resistance, humidity resistance, beautiful colors and reasonable prices. Our products are environment friendly and can be applied easily. They can also withstand harsh weather conditions. It is all these features that make our products more reliable than other available products. And so, customers place bulk orders for our products.

Sun Coaters
Sun Coat
Gondal baypass
Behind Krishna Park near Risita casting
HR Weight Bridge Road
Vavdi Servey No 46\1 Vavdi [Rajkot] Gujrat
email  , 
Mob +919825617620, +919427725632, +919898555561



Job Opportunities

Often we receive emails with no contents, but a resume word document attachment.
This column could be of use for such people, those who are looking our for better prospects. 
Use this space to publish your mini resume in the format  given in the adjacent column. You may or may not reveal your identity. Send us these details and we will put it this column


IPC Classified
Your message here
You can reach thousands of people thorough our classified ads. Place your own classified text  ads. or messages  here Just for Rs 500 (USD 10) only

Contact the moderator for details
India Powder Coating
Vivek Soley
3, Lalaram Nagar, Indore, 452001 MP India
Phone 91 731 2492291
Mobile 9826297112
emails: ,
Filter Cloth, Nylon Mesh & Polyster Mesh Cloth, Mask

M/S.Shilpan Enterprises 
Mfg. & Dealers of : Sieving cloth (5 Micron to 500 Micron) 
Filter Cloth, Nylon Mesh & Polyster Mesh Cloth, Mask, Tak Cloth & Tak Rag
Add:501,Indraprasth,2-A,Jitendra Road

Celll:9920444410 / 9324473481




The split between industrial and decorative?
The split between industrial and decorative? About 53 percent is from decorative, balance is from industrials and within industrials we have about 15-20 percent coming from performance quoting division. The rest is from auto. says HM The split between industrial and decorative? About 53 percent is from decorative, balance is from industrials and within industrials we have about 15-20 percent coming from performance quoting division. The rest is from auto. says HM Bharuka, MD of Kansai Nerolac.Bharuka, MD of Kansai Nerolac. <more>

Nippon JV can fetch Rs 125-130cr rev in 1 yr: Berger Paints Abhijit Roy, MD and CEO of Berger Paints expects company's third quarter volumes to be better going forward.
Berger Paints India Ltd entered into a joint venture (JV) with Japan's Nippon Bee Chemical Co Ltd on Friday to make and sell auto coatings in India. Speaking to CNBC-TV18, Abhijit Roy, MD and CEO of Berger Paints says the company will use the existing plants for the purpose and expects Rs 125-130 crore revenue in the first year. With this move, the company will enter the four-weeler automotive business and get international approvals for companies like Toyota and Honda, he adds. Roy also expects Berger's third quarter volumes to be better going forward.<more>

Jenson Nicholso standalone Sep '15 sales at Rs 10.90 crore
Jenson Nicholso standalone Sep '15 sales at Rs 10.90 crore Jenson and Nicholson has reported a standalone total income from operations of Rs 10.90 crore and a net loss of Rs 1.93 crore for the quarter ended Sep '15 0 0Google +0 0 Jenson and Nicholson has reported a standalone total income from operations of Rs 10.90 crore and a net loss of Rs 1.93 crore for the quarter ended Sep '15. Other income for the quarter was Rs 0.08 crore. For the quarter ended Sep 2014 the standalone total income from operations was Rs 12.87 crore and net loss was Rs 1.04 crore, and other income Rs 0.11 crore. Jenson Nicholso shares closed at 6.45 on November 09, 2015 (NSE) and has given -3.01% returns over the last 6 months and 37.23% over the last 12 months. <more>

Asian Paints unveils new paints service
Hyderabad: Paints maker Asian Paints has launched Green Painting Service (GPS), an eco-friendly water based paints range for all surfaces. Branded as a step towards green, this professional paint range, GPS, is being offered by Ezycolour Home Solutions, a professsional painting service from Asian Paints that offers end-to-end solutions for all painting requirements.

To take forward GPS initiative and spread the message of green living, Asian Paints had tied up with a few artists to create murals on popular streets incorporating surrounding trees in the artwork. Talented street artists from Mumbai created large murals on prominent streets near Shivaji Park using elements of nature and color to communicate the message of living in harmony with nature.

"For the first time, customers will get the opportunity to have water-based paints applied on all surfaces in their homes. They are non-toxic, making them safe for children and the elderly," said Amit Syngle, President-Sales, Marketing & Technology, Asian Paints.<more>

Dulux paint maker launches online interior design service
From big data tools that calculate how much seaweed slows down a ship to devices that identify the exact hue of a car's body colour, the business of paints and coatings is undergoing digital change.
Akzo Nobel, owner of the Dulux brand, is adding to a suite of technology offerings with an online interior design service which gives individual expert advice via a computer link-up.<more>

Axalta starts construction on Asia Pacific Technology Center in China
Facility to bring added product technology resources to customers across region

SHANGHAI--(BUSINESS WIRE)--Axalta Coating Systems, a leading global supplier of liquid and powder coatings, has today commenced construction of its Asia Pacific Technology Center (APTC) that will develop coating technologies designed to provide customers in China and the greater Asia-Pacific region with the best and latest products and services.

Scheduled to be operational in third-quarter 2016, the regional technology center will be equipped to undertake fundamental research and develop new coating applications, including the latest generation paint formulations, colors, resin development, dispersion technology, spray application and analytic evaluation of paint performance. The center will have technical support capabilities to serve light vehicle OEM, commercial vehicle and refinish customers as well as those in the industrial and architectural sectors. With a workforce capacity of up to 500 employees, the center is poised to support all Axalta businesses with high quality paints, lean processes, and sustainable applications.<more>

Axalta shares insights on coating technology and sustainable innovation at Campus Talk in Shanghai Jiaotong University
SHANGHAI--(BUSINESS WIRE)--Axalta Coating Systems, a leading global supplier of liquid and powder coatings, today presented a Campus Talk at Jiaotong University at which Axalta's Chief Technology Officer, Dr. Barry Snyder, unraveled the underlying technology in which the company invests in order to formulate high-performance and sustainable coating solutions.

Jiaotong University, one of the top universities in China, brought together an audience of students, academics and industry professionals to learn about the approach Axalta takes to develop coatings that are aesthetically outstanding and meet customer criteria for durability, productivity, ease-of-use and sustainability. Axalta's Campus Talks in China are designed to create awareness, educate and update local academic communities on the technologies and business systems that Axalta uses to support its customers.<more>

Jotun opens new factory in Brazil
Jotun is pleased to announce the opening of a new marine and protective coatings factory outside Rio de Janeiro, Brazil. The new facility is the company's first in South America, and will have an annual production capacity of 10 million litres.
The opening ceremony, that took place on November 17, 2015, was attended by H.R.H. The Crown Prince of Norway, Haakon, who officially opened the factory. The Norwegian Minister of Trade and Industry, Monica Maeland and local representatives from the State of Rio de Janeiro and the City of Itaborai were also present.

The factory is built on a 130 000 square meter plot of land, with a total investment of more than 100 million Brazilian Reais.<more>

Akzo Nobel opens technical center for wood coatings in Sweden
Akzo Nobel has opened a EUR 2.5 million technical application center for its Wood Coatings business in Malmo, Sweden.

The new facility is one of four global centers that work closely with customers to develop application systems to suit their specific manufacturing needs.

Equipped with state-of-the-art application lines
As well as housing experimental application equipment, the center is also equipped with several state-of-the-art application lines and temperature and humidity controlled spray booths. They give the company the unparalleled ability to mimic customer conditions in all segments of the industrial wood market.

"The facility enables us to replicate our customers' own manufacturing processes, making it easier to develop products and technologies that can be tailored to their specific application environments," explained Anthony Woods, RD&I Director for AkzoNobel's Wood Coatings business. "This helps us to develop new products aimed at improving their processes and productivity, particularly efforts to reduce application costs and lower the use of solvents and formaldehyde in line with changing regulations." <more>

Engineers Refine Thermal Protection System for Orion’s Next MissionOrion Spacecraft in Orbit
When it comes to a spacecraft enduring the extremely hot and fast journey from deep space back to Earth, NASA's Orion can withstand the heat. Engineers developing Orion's thermal protection system have been improving the spacecraft's heat shield design and manufacturing process since the vehicle successfully traveled to space for the first time last year. They are now enhancing the overall system in advance of the spacecraft's next mission - a flight that will put Orion through the harshest set of conditions yet.

For these future Orion missions, a silver, metallic-based thermal control coating will also be bonded to the crew module's thermal protection system back shell tiles. The coating, similar to what is used on the main heat shield, will reduce heat loss during phases when Orion is pointed to space and therefore experiencing cold temperatures, as well as limit the high temperatures the crew module will be subjected to when the spacecraft faces the sun. The coating will help Orion's back shell maintain a temperature range from approximately -150 to 550 degrees Fahrenheit prior to entry and also will protect against electrical surface charges in space and during re-entry. <more>



Events / Seminars / Exhibitions
On this Coating Calendar you will find a  wide variety of industrial events in the field of coatings, adhesives, sealants, construction chemicals and coatings application.

Please click here to view the complete Coating Calendar


12 November 2015
parts2clean 2016 (31 May -- 2 June):
parts2clean - prime source of industrial cleaning solutions and know-how-- The world's leading trade fair for the cleaning of parts and surfaces -- Rising demand for efficient and sustainable cleaning solutions

Hannover. Regardless of whether the cleaning task at hand is highly complex or fairly simple, the cleanliness of surfaces and components and the removal of all contaminants is a critical factor for the quality of subsequent processing steps, and indeed of the finished product. Consequently, the demand for cleaning solutions that are efficient, sustainable and produce consistently  reliable results is on the rise around the globe. parts2clean -- which takes  place in Stuttgart -- has built an international reputation as an unparalleled source of all the necessary solutions and expertise.

'The quota of decision-makers attending parts2clean is higher than average. Around 80 percent of the visitors come to the show with a view to investing in  new technology", explained Olaf Daebler, the director in charge of parts2clean at Deutsche Messe. "For exhibitors that means plenty of serious inquiries and ideal opportunities for talking business with new customers."This is confirmed by Roland Jung, head of surface technology at Hermann Bantleon GmbH: "At the 2015 show, we again had many visitors coming to our stand with specific  projects and issues. Some of these were new contacts, and very promising  ones, too." It is no surprise, then, that the Leading International Trade Fair for Industrial Parts and Surface Cleaning is regarded by the industry as an absolute must. "It's important for us to come here and present our broad range of products to the market. After all, parts2clean is the platform that customers look to for information about solutions for their cleaning challenges and the latest developments in the field", said Walter Muck from the marketing department at Pero AG.

The No.1 source of expert know-how on industrial parts cleaning

But it's not just the comprehensive array of exhibits covering every sector and every type of material that draws the visitors. The three-day parts2clean Industry Forum is also a big part of the attraction. With an average of more than 25 presentations, which are simultaneously translated (German <> English), the Forum offers valuable know-how on a variety of topics of importance to each and every stage of the process chain for cleaning industrial parts and surfaces. The 2016 event will offer separate sessions on "cleaning approaches",'upstream and downstream processes', and "analytics". Also planned are two blocks of presentations to be held by industrial users. The one block will deal with cleaning applications in specific fields such as medical technology, electronics production, the automotive industry, the aerospace industry, plastics, and maintenance, repair and overhaul (MRO). The other topic block will address "engineering for cleanliness", with presentations by users on aspects such as cleaning-friendly design and construction, ways of rendering cleaning unnecessary, and clean- friendly production. Presentations may be submitted at under "Program / Expert Forum".

Guided Tours -- the shortcut to valuable expertise and contacts

The Guided Tours program offered as a service for visitors has proven so popular that it is being expanded for parts2clean 2016. The tours enable visitors to efficiently increase their know-how on everything of special interestto them. It is a quick and easy way to discover relevant solutions and innovations and identify potential solution-providers. The Guided Tours are also highly beneficial for participating exhibitors, enabling them to present their products and innovations to a choice, pre-selected audience right at their stands, resulting in additional contacts and sales prospects.

Parallel events of relevance to industrial cleaning

In parallel with parts2clean (31 May to 2 June 2016), several other trade fairs in which parts cleaning plays an essential role are also taking place at the exhibition center in Stuttgart. The various coating processes featured at O&S, the International Trade Fair for Surface Treatments and Coatings, all require a scrupulously clean substrate. LASYS, the International Trade Fair for Laser Materials Processing, showcases laser applications across all sectors of industry and for all types of materials, and here, too, the right outcome often depends on having a clean surface to start with. And also for many of those attending AUTOMOTIVE Expo -- a group of five trade fairs covering different aspects of the automotive industry -- the cleaning of parts and surfaces is likewise of great importance for manufacturing operations.

Deutsche Messe AG

With revenue of 280 million euros (2014), Deutsche Messe AG ranks among the world's ten largest trade fair companies and operates the world's largest exhibition center. In 2014, Deutsche Messe planned and staged 134 trade fairs and congresses around the world -- events which hosted a total of over 41,000 exhibitors and some 3.6 million visitors. The company's event portfolio includes such world-leading trade fairs as CeBIT (IT and telecommunications), HANNOVER MESSE (industrial technology), BIOTECHNICA/LABVOLUTION (biotechnology and lab technology), CeMAT (intralogistics), didacta (education), DOMOTEX (floor coverings), INTERSCHUTZ (fire prevention and Deutsche Messe AGMessegelande
30521 Hannover
Germany Tel. +49 511 89-0
Fax +49 511 89-36694 
rescue), and LIGNA (wood processing and forestry). With approx. 1,200 employees and a network of 66 representatives, subsidiaries and branch offices, Deutsche Messe is present in more than 100 countries worldwide.No. of characters (incl. spaces): 5,709
Your contact for further information: Doris Schulz, SCHULZ. PRESSE. TEXT.Tel.: +49 711 854085

Further press releases as well as photos are available for downloading
Doris Schulz, Landhausstrabe 12, 70825 Korntal, Germany


India Powder Coating
Vivek Soley
3, Lalaram Nagar, Indore, 452001 MP India
Phone 91 731 2492291
Mobile +91 9826297112
Alternative email,

While we have used our best efforts in collecting and preparing the information on this website and newsletter, we do not assume, any liability for any loss or damage caused by errors or omissions, whether such errors or omissions resulted from negligence, accident or other causes. The user may use their own discretion while using the information.