Nordson Banner
Kansai Nerolac Banner  
 

 

 
 
 Home
 Powder Coating Equipment
 Conveyors
 Spray Booths
 Ovens
 Turnkey Systems
 
 Equipment
 Raw Material
 Air Compressors
 Dust Collection, Filters
 Pre treatment Chemical 
 Masking Products
 Powder Coating Units
 Powder Manufacturers
 Testing Equipment
 Testing Labs
 
 Associations
 Consultants
 Used/Surplus equipment
 Books Periodicals
 Jobs/Appointments

 


 


1-4 Mar 16 Moscow/Russia
Interlakokraska 2016
Chemical and Technological Exhibitions Division, Expocentre ZAO
To subscribe to our free monthly "IPC- e-newsletter", and read the current edition click the banner below.

_____________

To subscribe to our paid "ebiz" newsletter click the banner below.



_____________

Explore our Archives


Explore all the newsletters issued in the past ten years.
 
Share your messages, problems, tips, queries, discussions etc. on our message board..
Note : Do not post messages of commercial nature.

You can promote your products and services through our website. Click here for various promotion options

Many portals talk to the world...
IPC  talks to people !


For those who need to know the moderator personally.
Vivek Soley


Create Your Badge


India Powder Coating

Promote Your Page Too


 

 


 

 
 It is not the strongest of the species that survives, nor the most intelligent that survives. It is the one that is most adaptable to change

.


Welcome to the February 2016 edition of the IPC e-newsletter. The IPC e newsletter is distributed free to more than 5000 people around the world.

This edition of the newsletter contains:

Green News
Infomercials
News Features
Books and Periodicals
People Visit Feedback
Exhibition and Conferences.

If you have information you would like to have included in this newsletter, please contact the moderator using the details given at the end of each newsletter. While we have used our best efforts in collecting and preparing the information on this newsletter, we do not assume, any liability for any loss or damage caused by errors or omissions, whether such errors or omissions resulted from negligence, accident or other causes. The user may use their own discretion while using the information.

If your e-mail program does not support HTML or if this e-newsletter does not appear correctly, please copy and paste the following URL in your web browser:

http://ipconweb.com/news.htm


 

Note:
A lot of efforts go into the compilation of the pages of our website  Some of the contributions from our subscribers are exclusive.
While using the contents into other print media, we would appreciate a reference to our website.

 


Some of our subscribers are not receiving the newsletter on their email ids. Here are some tips.

Check your spam or junk mail box.
If your are not subscribed to our newsletter please add your email id in the box given below.

Subscribe to our e newsletter

Powered by us.groups.yahoo.com


 


I
t appears that many of our subscribers are not aware of our e-biz newsletter. Our website generates a number of business enquiries every week. Such sales leads can generate business for a several products. You must have observed that we are eager to share such information with all the relevant people. Unlike, other business website which restrict "supplier to customer" interaction, we promote this activity.

Subscribe to the e-biz-newsletter, which contains information about potential customers who are in need of products related to powder coating.

To get this e-biz-newsletter, the user would have to pay a small annual processing fee. Please send a DD or cheque AT PAR of Rs 7500 (US$ 200) in favour of "India Powder Coating" payable at Indore at the
contact address


 

 
 


 

Infomercials

 
  Infomercial Vijay Enterprises Pvt Ltd  
 
Vijay Enterprises Pvt. Ltd. 

Vijay Enterprises is a leading manufacture of powder coating materials (PCM) in India. VIJAY COAT today stands as a Reliable source of High Quality and Durable Powder Coating materials at very reasonable prices. Vijay's PCM find extensive application for industrial and other demanding applications. Vijay enterprises was incorporated in 1995 with a view to supplying quality PCMs to Indian industry. Vijay's manufacturing set up is equipped with best machines from M/s Buss AG Switzerland who are world's largest manufacturer of Powder Coating Machines. Vijay has now established itself and earned a name for its quality supplies and prompt delivery at reasonable prices.

The types of powders manufactured by VIJAYCOAT are as under.
Pure Epoxy
Epoxy Polyester (Hybrid)
Pure Polyester (TGIC)
Pure Polyester (TGIC Free)
Super Durable
Poly Urethane Powder

Types of Finishes manufactured by VIJAYCOAT
Glossy
Semi Glossy
Matt 
Texture
Structure
Metallic
Specialties like Silver, Gold, Copper
Antique Finish
Clear
Hammer Tone
Glitter
Wrinkle
Wood Finish
Pearl Finish
Coloured Transparent

Technical Powders Manufactured by VIJAYCOAT
Fast Cure
Lower Temperature Cure
Thin Film Powders
Hot water resistance powders
Heat Resistant Powders for automobile silencers
Fire Retardant Powders
Powders for in contact with food stuff (Food Grade)
Electrical Insulation Grade
Lead Free and ROHS Compliant Powders
Reach registered European Powders.

Fusion Bonded Epoxy Powders
Fusion bonded Epoxy Powders for Reinforcing Bars
Fusion bonded Epoxy Powders for Pipe Coatings


Administrative Office:
Vijay Enterprises Pvt. Ltd.
 

Admin. Office :
65, World Business House
Nr Piramal Garden Cross Road
Eliss Bridge, AHMEDABAD
Ph 079-26461540, 65242828, Tel/Fax 079-26461539 
Email: vijaycoat@gmail.com  , vijaycoatoffice@vijaycoat.com  
web: www.vijay-powdercoat.com 
 
     


 

  Infomercial Sun Coats  
 
Since 2005, we, Sun Coaters, have been offering premium quality Coating Powder and
Powder Coatings Paints to the customers. We are a manufacturer, trader, exporter and supplier of Glossy Coating Color Powder, Polyester Coating Color Powder, Polyester Hybrid Color Powder and Industrial Polyester Color Powder. We also provide Epoxy Powder Coatings, Pure Polyester Powder Coatings, Epoxy Polyester Powder Coatings, Glossy Finish Powder Coatings, Matt Finish Powder Coatings and much more.

We make all our paints and powder using good quality ingredients. All the products are made under the supervision of quality experts. And so, our products carry numerous matchless features like long storage life and cost-effectiveness. Customers admire them for their high mechanical performance, excellent chemical resistance, good electric insulation ability, high stability, corrosion resistance, humidity resistance, beautiful colors and reasonable prices. Our products are environment friendly and can be applied easily. They can also withstand harsh weather conditions. It is all these features that make our products more reliable than other available products. And so, customers place bulk orders for our products.

Sun Coaters
Sun Coat
Gondal baypass
Behind Krishna Park near Risita casting
HR Weight Bridge Road
Vavdi Servey No 46\1 Vavdi [Rajkot] Gujrat
India
email sun_coat@yahoo.com  , suncoaters@gmail.com 
Ph.+912812927909
Mob +919825617620, +919427725632, +919898555561
website http://www.suncoaters.com/ 
website http://suncoatindia.com/ 
 
 
     

 

 

Job Opportunities

Often we receive emails with no contents, but a resume word document attachment.
This column could be of use for such people, those who are looking our for better prospects. 
Use this space to publish your mini resume in the format  given in the adjacent column. You may or may not reveal your identity. Send us these details and we will put it this column
Amit Pawar
DOB 3 Oct 1979
Pune
Working as Project Engineer in company manudacturing Turnkey Basis Powder Coating Plan
Click here for Resume

 

IPC Classified
Your message here
You can reach thousands of people thorough our classified ads. Place your own classified text  ads. or messages  here Just for Rs 500 (USD 10) only

Contact the moderator for details
India Powder Coating
Vivek Soley
3, Lalaram Nagar, Indore, 452001 MP India
Phone 91 731 2492291
Mobile 9826297112
emails:   viveksoley@hotmail.com  viveksoley@ipconweb.com , indiapowdercoating@yahoo.com
 
 

 

 

 
 

News


Kansai Nerolac Paints informs about board meeting
Kansai Nerolac Paints has informed that a meeting of the Board of Directors of the Company will be held on January 25, 2016, for considering the unaudited financial results for the quarter ended December 31, 2015 (Q3). Further, the 'Trading Window' of the Company shall be closed from January 11, 2016 to January 27, 2016 in accordance with the SEBI (Prohibition of insider Trading) Regulations. It is clarified that 'Trading Window' of the Company is closed only for the Directors / Officers / designated employees / Insiders of the Company as per SEBI (Prohibition of insider Trading) Regulations. This is however not applicable for the general investors and the trading will be open for them.
The above information is a part of company's filings submitted to BSE. <more>


Kansai Nerolac net jumps 28% on lower crude prices
MUMBAI: Kansai Nerolac Paints today reported 28.5 per cent increase in net profit at Rs 84.4 crore for the three months to December on lower input cost.

The company reported a net profit of Rs 65.66 crore in third quarter of 2014-15 fiscal.

Gross sales during December quarter stood at Rs 1,177.3 crore, up 11.3 per cent from the year-ago period.

The bottomline was impacted due to the rupee fall and higher prices of the inputs, primarily of the crude on the derivatives market, coupled with higher tax outgo which rose to Rs 38.9 crore from Rs 27.1 crore, the company said <more>

Berger Paints India Ltd to announce Q3 results on Feb 04, 2016
A meeting of the Board of Directors of Berger Paints India Ltd will be held on February 04, 2016, to consider and approve, the Unaudited Financial Results of the Company for the quarter ended December 31, 2015 (Q3).

Shares of BERGER PAINTS INDIA LTD. was last trading in BSE at Rs.257.25 as compared to the previous close of Rs. 263.15. The total number of shares traded during the day was 55136 in over 1669 trades.

The stock hit an intraday high of Rs. 263.4 and intraday low of 250. The net turnover during the day was Rs. 14064107. <more>

Jenson & Nicholson (India) Ltd has informed BSE that the Board of Directors of the Company at its meeting held on January 07, 2016, has passed following Resolutions:
1. As per Sections 149 and 161 and other applicable provisions, if any, of the Companies Act, 2013 and SEBI (LODR), Regulations, 2015, Mr. Ajay Kumar Srivastava has been appointed as Additional Director of the Company to act as Independent Director.

2. Board considered and ratified the Trademark License cum Assignment Agreement executed by and between Jenson & Nicholson (I) Ltd., Jenson & Nicholson Paints Private Limited (Wholly owned subsidiary) and Vivid Colors Private Limited on December 21, 2015.

3. Board considered and approved draft Share Subscription, Share Allotment and Shareholders Agreement to be executed between Jenson & Nicholson (I) Ltd., Jenson & Nicholson Paints Pvt. Ltd. (Wholly owned subsidiary) and Investors. By virtue of this Agreement shareholding of Jenson & Nicholson (I) Ltd. and Investors in Jenson & Nicholson Paints Pvt. Ltd. (Wholly owned subsidiary) will result in 55% and 45% of total share capital respectively. Further Board authorized Managing Director to execute/sign the said Agreement.

4. Board took note of the resignation letter tendered by Mr. Ranjit Singh, Director of the Company.<more>

Akzo Nobel India Q3 Net Profit Up 24.63%
New Delhi: Paints and coatings maker Akzo Nobel India on Friday reported an increase of 24.63 per cent in net profit at Rs 63.24 crore for the third quarter ended December.

It had posted a net profit of Rs 50.74 crore in the same quarter a year ago, Akzo Nobel said in a statement.

The company's total income from operation for the quarter under review increased by 8.88 per cent to Rs 748.07 crore from Rs 687.02 crore in the October-December period of the previous fiscal.<more>

Global Paint and Coating Market expected to grow at a CAGR of 5.5% during 2014 to 2020 : PMR Report
The paints and coatings industry is growing due to the fast pace of industrial development around the world, rising interest in architecture in emerging countries, and the increasing number of end-use industries. The huge demand from the construction and building industry and the soaring demand for waterborne coatings have also fuelled the market for paints and coatings. On the other hand, factors such as the environmental and health concerns about the VOC content of paints and coatings are predicted to impede the growth of the market for paints and coatings. <more>

The world's largest chemical producer is expecting its balance sheet to crumble on low oil prices
The world's largest chemical company BASF warned investors that it expects to book a &euro;600 million impairment charge because of cripplingly low oil prices.
The German chemical giant said in its preliminary 2015 statement that "prices for oil and gas will remain at a low level in 2016. The assumptions for oil and gas prices have also been reduced for subsequent years." <more>


Nature's unique way of controlling colour explains why birds never go grey
Birds generate their colour using structure, not dyes and pigments

The jay is able to change the colour of its feathers along the equivalent of a single human hair using a tuneable nanostructure

This discovery may lead to synthetic structural colour that could be made cheaply and used in paints and clothes that will not fade like dyes and pigments.

Birds use sophisticated changes to the structure of their feathers to create multi-coloured plumage, using a process that could pave the way for the creation of paints and clothing colours that won't fade over time.

Using X-ray scattering at the ESRF facility in France to examine the blue and white feathers of the jay, researchers from the University of Sheffield found that birds demonstrate a surprising level of control and sophistication in producing colours.

Instead of simply using dyes and pigments that would fade over time, the birds use well-controlled changes to the nanostructure to create their vividly coloured feathers - which are possibly used for jays to recognise one another. The jay is able to pattern these different colours along an individual feather barb - the equivalent of having many different colours along a single human hair.

The jay's feather, which goes from ultra violet in colour through to blue and into white, is made of a nanostructured spongy keratin material, exactly the same kind of material human hair and fingernails are made from.<more>

Sugar-based Carbon Hollow Spheres that Mimic Moth Eyes
They are not to eat, but this insect-inspired ordered monolayer of hollow carbon spheres may be a new, green and extremely lightweight antireflective coating that almost perfectly absorbs microwave radiation

Washington, D.C., Jan.5, 2015 -- Antireflective coatings are used to cut surface glare in everything from eyeglasses and camera lenses to solar cells, TV screens and LED devices. Now researchers from Research Institute for Nuclear Problems of Belarusian State University in Belarus and Institut Jean Lamour-Universite de Lorraine in France have developed a novel, low-cost, ultra-lightweight material that could be used as an effective anti-reflective surface for microwave radiation based on the eyes of moths.<more>

DuPont steps up cost cut plans ahead of Dow Chemical merger
DuPont (DD +0.8%) says it now plans to cut $730M in expenses this year, up from its December projection of $700M in cost reductions amid a broad restructuring plan to eliminate ~5K jobs in an effort to improve profits and hasten integration with Dow Chemical (DOW +0.7%), company execs said in today's earnings conference call."The big takeaway today is the pace of change that's happening at this company," says Edward Jones analyst Matt Arnold, who expects the cost cuts to continue and considers the current reductions just a starting point. <more>

Barefoot burglar sprayed with UV paint in Ludlow break-in
A barefooted burglar who was sprayed with invisible paint during a break-in was caught when police shone a UV light on his feet and they glowed green.
John Richards was seen on CCTV being doused with the traceable liquid by a security system at a business in Mill Street, Ludlow.
The 39-year-old pleaded guilty to burglary at Shrewsbury Crown Court.
Police said it was the "first success" in an operation using covert technology to tackle burglaries in the area.<more>
 

 

 

Events / Seminars / Exhibitions
On this Coating Calendar you will find a  wide variety of industrial events in the field of coatings, adhesives, sealants, construction chemicals and coatings application.

Please click here to view the complete Coating Calendar

 

parts2clean 2016 (31 May -- 2 June):
parts2clean - prime source of industrial cleaning solutions and know-how-- The world's leading trade fair for the cleaning of parts and surfaces -- Rising demand for efficient and sustainable cleaning solutions

Hannover. Regardless of whether the cleaning task at hand is highly complex or fairly simple, the cleanliness of surfaces and components and the removal of all contaminants is a critical factor for the quality of subsequent processing steps, and indeed of the finished product. Consequently, the demand for cleaning solutions that are efficient, sustainable and produce consistently  reliable results is on the rise around the globe. parts2clean -- which takes  place in Stuttgart -- has built an international reputation as an unparalleled source of all the necessary solutions and expertise.

'The quota of decision-makers attending parts2clean is higher than average. Around 80 percent of the visitors come to the show with a view to investing in  new technology", explained Olaf Daebler, the director in charge of parts2clean at Deutsche Messe. "For exhibitors that means plenty of serious inquiries and ideal opportunities for talking business with new customers."This is confirmed by Roland Jung, head of surface technology at Hermann Bantleon GmbH: "At the 2015 show, we again had many visitors coming to our stand with specific  projects and issues. Some of these were new contacts, and very promising  ones, too." It is no surprise, then, that the Leading International Trade Fair for Industrial Parts and Surface Cleaning is regarded by the industry as an absolute must. "It's important for us to come here and present our broad range of products to the market. After all, parts2clean is the platform that customers look to for information about solutions for their cleaning challenges and the latest developments in the field", said Walter Muck from the marketing department at Pero AG.

The No.1 source of expert know-how on industrial parts cleaning

But it's not just the comprehensive array of exhibits covering every sector and every type of material that draws the visitors. The three-day parts2clean Industry Forum is also a big part of the attraction. With an average of more than 25 presentations, which are simultaneously translated (German <> English), the Forum offers valuable know-how on a variety of topics of importance to each and every stage of the process chain for cleaning industrial parts and surfaces. The 2016 event will offer separate sessions on "cleaning approaches",'upstream and downstream processes', and "analytics". Also planned are two blocks of presentations to be held by industrial users. The one block will deal with cleaning applications in specific fields such as medical technology, electronics production, the automotive industry, the aerospace industry, plastics, and maintenance, repair and overhaul (MRO). The other topic block will address "engineering for cleanliness", with presentations by users on aspects such as cleaning-friendly design and construction, ways of rendering cleaning unnecessary, and clean- friendly production. Presentations may be submitted at www.parts2clean.de under "Program / Expert Forum".

Guided Tours -- the shortcut to valuable expertise and contacts

The Guided Tours program offered as a service for visitors has proven so popular that it is being expanded for parts2clean 2016. The tours enable visitors to efficiently increase their know-how on everything of special interestto them. It is a quick and easy way to discover relevant solutions and innovations and identify potential solution-providers. The Guided Tours are also highly beneficial for participating exhibitors, enabling them to present their products and innovations to a choice, pre-selected audience right at their stands, resulting in additional contacts and sales prospects.

Parallel events of relevance to industrial cleaning

In parallel with parts2clean (31 May to 2 June 2016), several other trade fairs in which parts cleaning plays an essential role are also taking place at the exhibition center in Stuttgart. The various coating processes featured at O&S, the International Trade Fair for Surface Treatments and Coatings, all require a scrupulously clean substrate. LASYS, the International Trade Fair for Laser Materials Processing, showcases laser applications across all sectors of industry and for all types of materials, and here, too, the right outcome often depends on having a clean surface to start with. And also for many of those attending AUTOMOTIVE Expo -- a group of five trade fairs covering different aspects of the automotive industry -- the cleaning of parts and surfaces is likewise of great importance for manufacturing operations.

Deutsche Messe AG

With revenue of 280 million euros (2014), Deutsche Messe AG ranks among the world's ten largest trade fair companies and operates the world's largest exhibition center. In 2014, Deutsche Messe planned and staged 134 trade fairs and congresses around the world -- events which hosted a total of over 41,000 exhibitors and some 3.6 million visitors. The company's event portfolio includes such world-leading trade fairs as CeBIT (IT and telecommunications), HANNOVER MESSE (industrial technology), BIOTECHNICA/LABVOLUTION (biotechnology and lab technology), CeMAT (intralogistics), didacta (education), DOMOTEX (floor coverings), INTERSCHUTZ (fire prevention and Deutsche Messe AGMessegelande
30521 Hannover
Germany Tel. +49 511 89-0
Fax +49 511 89-36694
info@messe.de
www.messe.de 
rescue), and LIGNA (wood processing and forestry). With approx. 1,200 employees and a network of 66 representatives, subsidiaries and branch offices, Deutsche Messe is present in more than 100 countries worldwide.No. of characters (incl. spaces): 5,709
Your contact for further information: Doris Schulz, SCHULZ. PRESSE. TEXT.Tel.: +49 711 854085
E-mail: ds@pressetextschulz.de

Further press releases as well as photos are available for downloading
at: www.parts2clean.de/de/info/fuer-journalisten/ 
Doris Schulz, Landhausstrabe 12, 70825 Korntal, Germany
E-mail: ds@pressetextschulz.de
 

 


India Powder Coating
Vivek Soley
3, Lalaram Nagar, Indore, 452001 MP India
Phone 91 731 2492291
Mobile +91 9826297112
emails:    ipconweb@gmail.com 
Alternative email viveksoley@hotmail.com  indiapowdercoating@yahoo.com,

While we have used our best efforts in collecting and preparing the information on this website and newsletter, we do not assume, any liability for any loss or damage caused by errors or omissions, whether such errors or omissions resulted from negligence, accident or other causes. The user may use their own discretion while using the information.